TECHNICAL CHARACTERISTICS

• TURNTABLE DIAMETER : 1500/1800 mm
• TURNTABLE ROTATING SPEED : ADJUSTABLE FROM 7 TO 15 r.p.m.
• MAX. LOAD CAPACITY and MAX. PALLET DIMENSIONS : depending from the machine execution
• MAX. HEIGHT OF THE FILM ROLL : 500 mm
• MAX. DIAMETER OF THE FILM ROLL : 300 mm
• PHOTOCELL FOR THE AUTOMATIC PALLET HEIGHT DETECTION
• FP30/S-T: MAIN CONTROL BOX WITH DIGITAL KEYBOARD EQUIPPED BY A PROGRAMMABLE MICROPROCESSOR FOR THE BEST REGULATION OF THE REQUIRED PARAMETERS AND THE SELECTION OF THE WRAPPING PROGRAMME AMONG :
  * STANDARD WRAPPING CYCLE (WAY-UP AND DOWN)
  * WAY-UP WRAPPING ONLY
  * WAY-UP WRAPPING ONLY WITH FILM CARRIAGE STOP TO ALLOW THE POSITIONING OF A COVER SHEET ON THE TOP SIDE OF THE PALLET WITH ITS 4 SIDES COMPLETELY FREE FOR A WATERPROOF PROTECTION
  * STANDARD WRAPPING CYCLE (WAY-UP AND DOWN) WITH FILM CARRIAGE STOP TO ALLOW THE POSITIONING OF A COVER SHEET ON THE TOP SIDE OF THE PALLET, WITH ITS 4 SIDES COMPLETELY FREE FOR A WATERPROOF PROTECTION
• FP30/T: ELECTROMECHANIC CONTROL BOX
• DIAGNOSTIC FOR THE AUTOMATIC DETECTION OF ANY DEFECT OR ALARM (ONLY FOR THE FP30/S-T VERSION)
• SELECTOR FOR MANUAL OR AUTOMATIC WORKING PROCEDURE
• SEPARATE TIMER FOR THE BOTTOM AND TOP WRAPS SETTING
• INVERTER CONTROLLING THE PROGRESSIVE START, THE REGULATION OF THE ROTATING SPEED AND THE INDEXED STOPPING POSITION OF THE TURNTABLE
• ELECTROMAGNETIC CLUTCH FOR THE FILM TENSION CONTROL, ADJUSTABLE THROUGH A POTENTIOMETER
• FILM CARRIAGE WITH BELT TRANSMISSION
• LOWER SAFETY UNIT FOR THE PROTECTION OF THE FILM CARRIAGE AREA
• FILM CARRIAGE MOTOR LOCATED INSIDE THE COLUMN
• TURNTABLE MOTOR COVER
• SAFETY ARMS WITH PHOTOCELL (FILMA PATENT NO. MI96UOOO255) TO PREVENT ANY ACCIDENT DUE TO THE UN-EXPECTED ENTRY OF THE JACKPALLET INSIDE THE THE TURN-TABLE AREA DURING THE NORMAL WORKING CYCLE
• MACHINE PREPARED TO BE EQUIPPED WITH THE PNEUMATIC TOP PRESS
• STANDARD ELECTRIC SETTING : 380 V – 50 cycles - 3phase + neutral
• TOTAL WEIGHT OF THE MACHINE : 550 kg

WIDE RANGE OF ACCESSORIES AVAILABLE ON REQUEST